• Layer 2 Switching
• Non-blocking connectivity
• 1U form factor for flexible installation
Summary
• 48 RJ45 10/100/1000 ports and
• 4 SFP 1G ports
• Non-blocking connectivity
• Standard Layer 2 Features:
• IPV4 and IPv6, QoS, 256VLANs
• Jumbo Frame Support up to 9KB
• RJ45 Console Port for CLI: Web Management GUI, CLI
• Energy Efficient Ethernet (802.3az)
• Power supply: 65W (83% efficiency)
• 1U form factor for flexible installation
• Dimensions (W x D x H): 440mm x 379mm x 43mm
• Weight: 6.8 lbs / 3.1 kg
Specification
Switching Features:
- 16K MAC address entries
- Auto negotiation on all ports
* Flow Control supported
* Provides IEEE 802.3x for full duplex mode
- 10/100Mbps mode > back pressure flow control half duplex mode
- Storm protection
* Broadcast
* Multicast
- Spanning tree
* IEEE 802.1D spanning tree
* IEEE 802.1s multiple spanning tree (32 instance)
* IEEE 802.1w rapid spanning tree
* Spanning Tree fast forwarding
* Loopback Detection
* Auto edge port
* BPDU filter/guard
* Root Guard
- VLANs support:
* IEEE 802.1Q VLAN
* Port-based VLAN
* MAC-based VLAN
* Protocol-based VLAN
- 16 entries per system
* IP-based VLAN
* 256 active VLANs
* Support private VLAN Edge (Traffic Segmentation)
* Voice VLAN
* Guest VLAN
* VLAN Trunking
* GVRP
* Supports Multicast VLAN Registration (MVR)*:
- 5 MVR group
- 256 MVR source group (shared with IPMC table)
- Double tagging:
* IEEE 802.1 Q-in-Q
* IEEE 802.1ad provider bridge
* Unqualified learning and forwarding
- IGMP:
* IGMP snooping v1/v2/v3
* IGMP v1/v2 querier
* IGMP immediate leave
* IGMP filtering/throttling
* IGMP snooping leave proxy
* IGMP v1/v2/v3 proxy
- Link Aggregation
* IEEE 802.3ad with LACP
* Manual trunking
* Up to 12 aggregation groups are supported, and up
to 8 ports per group
Security Features:
- Port Security (MAC-binding)
* Static port (MAC-based)
* Dynamic port (MAC-based)
- User/Password protected system management interface
* SNMP
* Web
* Telnet
- Access control list (512 rules)
* L2/L3/L4
* IP-MAC ACL
* Time-based ACL
- Extended IPv6 ACL
- RADIUS (RFC2138)
- TACACS+
- HTTPS/SSL
- SSH v1.5/v2.0
Specification (Continued)
Quality of Service (QoS):
- Provides 4 queues per port
- Priority queue scheduling scheme
* Strict priority
* Deficit weighted round robin
- IPv4/v6 DiffServ
* L2/L3/L4 Traffic Classification / Priority Management
* IEEE 802.1p (COS)
* DSCP/TOS
* TCP/UDP port number
* IP SA/DA
* MAC SA/DA
* IPv6
- Queuing
* Port based CoS
* IEEE 802.1p VLAN information based CoS
* IP ToS/IP precedence based CoS
* DSCP based CoS
* TCP/UDP port base CoS
* QoS marking
- Packet prioritization based on ingress/egress ports'
pre-defined value listed below
* Trusted
* IEEE 802.1p/Q tag
* ToS field tag
* IPv4 DSCP
* Ethernet type field
* TCP and/or UDP port numbers
* SA and/or DA IP address
* ToS Field Tag
- Traffic shaping
* IP based (all ports)
* Port based (all ports)
* Port based shaping QoS aware
- Per port bandwidth management
* Resolution 64KB
- Ingress/Egress metering at 64KB increments
* Ingress/egress policer
* Ingress and egress co-work
- CPU interface filtering