|
Motherboards - Supermicro S1150
SKU : 108142 Mfg. Part No. : MBD-X10SLL-F-O
X10SLL-F S1150 E3/i3 SATA 2xGLAN IPMI mATX
Socket H3 / LGA 1150 - 1 CPU(s) Max. - Intel C222 Chipset - 4 RAM Slots - Max. 32GB DDR3 ECC UDIMM - Aspeed AST2400 Graphics - 1x VGA Ports - 2x PCIeX8 Slots - 1x PCIeX4 Slots - 4x SATA 3.0Gbps - 2x SATA 6.0Gbps - RAID 0/1/5/10 Supported - Dual Gigabit LAN - MicroATX (9.6" x 9.6") Form Factor - IPMI 2.0 - 1 Year Depot Carry-In Mfg. Warranty
Price : $295.00*
Qty.
(* - Cash Discounted Price (Reg. $309.75))
|
MBD-X10SLL-F |
|
|
|
Form Factor |
|
Dimensions |
-
9.6" x 9.6", (24.4cm x 24.4 cm)
|
|
|
CPU |
-
Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
-
Single Socket H3 (LGA 1150)
|
|
|
Memory Capacity |
-
4x 240-pin DDR3 DIMM sockets
-
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
-
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
-
Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SATA |
-
SATA3 (6Gbps) w/ RAID 0, 1
-
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
-
Support for Intelligent Platform Management Interface v.2.0
-
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
-
Aspeed AST2400 with 10/100/1000M bps MAC
|
Network Controllers |
-
Intel® i217LM + Intel® i210AT Controllers
-
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
-
1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA |
-
BMC integrated Aspeed AST2400
|
|
|
Serial ATA |
-
2x SATA3 (6Gbps) ports
-
4x SATA2 (3Gbps) ports
|
LAN |
-
2x Gigabit Ethernet LAN ports
-
1x RJ45 Dedicated IPMI LAN port
|
USB |
-
2x USB 3.0 ports (1 Type-A, 1 via header)
-
6x USB 2.0 ports (4 rear, 2 via header)
|
VGA |
|
Serial Port / Header |
-
2x COM ports (1 rear, 1 header)
|
DOM |
-
SATA DOM (Disk on Module) power connector support
|
TPM |
|
|
PCI-Express |
-
1x PCI-E 3.0 x8 (in x16) slot
-
1x PCI-E 3.0 x8 slot
-
1x PCI-E 2.0 x4 (in x8) slot
|
|
|
BIOS Type |
-
128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
-
DMI 2.3
-
ACPI 1.0 / 2.0
-
USB Keyboard support
-
SMBIOS 2.3
|
|
|
Software |
-
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
-
SuperDoctor® III
-
Watch Dog
-
NMI
|
Power Configurations |
-
ACPI / ACPM Power Management
-
Main Switch Override Mechanism
-
Power-on mode for AC power recovery
-
Internal/External modem ring-on
|
|
|
Voltage |
-
Monitors for CPU Cores, +12V, +3.3V, +5V,+5V Standby, VBAT, HT, Memory, Chipset Voltages.
-
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
-
Total of five 4-pin fan headers supporting up to 5 fans
-
5x fans with tachometer status monitoring
-
Status monitor for speed control
-
Status monitor for on/off control
-
Support 3-pin fans (w/o speed control)
-
Low noise fan speed control
-
Pulse Width Modulated (PWM) fan connectors
|
Temperature |
-
Monitoring for CPU and chassis environment
-
CPU thermal trip support
-
FC temperature sensing logic
-
Thermal Monitor 2 (TM2) support
-
PECI
|
LED |
-
CPU / System Overheat LED
-
+5V Standby alert LED
|
Other Features |
-
Chassis intrusion detection
-
Chassis intrusion header
|
|
|