Key Features

Supports two systems (nodes) in a 1U form factor. Each node supports:
1. 1200W High-efficiency Power Supply
2. 2x 3.5" Hot-swap SATA Drive Bays
3. 3x PWM Cooling Fans
4. 1x Low-profile Slot
5. Power Switch, Reset Button &
    5x LED Indicators

Standard Parts List

     Part Number    Qty    Description
Air Shroud    MCP-310-18008-0N    2    Cooling Air Shroud
Backplane    BPN-SAS-808    1    SAS808 Backplane for 1U Twin
Chassis    CSE-808T-1200B    1    1U Chassis (Black)
Cable(s)    CBL-0087
CBL-0160L
CBL-0201L
CBL-0212L    2
1
1
2    20" 16-to-16 Pin Round Ribbon Cable
Power Cord
SATA Set of 4(Round) Straight to Right Angle,(51/47/41/37)cm
20cm HDD Power Extension Striaght to Right Angle Cable
Fan(s)    MCP-290-00033-0N    2    Fan holder
Front Panel    MCP-280-00020-0N    2    Front Panel Control Board for SC808, Dual color
Hard Drive Trays    MCP-220-00001-01    4    Black 3.5" hot-swap drive tray
Mounting Rails    MCP-290-00042-0V    1    Rail set
Parts    MCP-250-80801-0N
MCP-270-00010-00
MCP-160-80802-0N    1
1
2    Power Distributer Cover
1U SC808 Chassis Base
Motherboard mylar sheet for SC808
Power Supply    PWS-1K21P-1R
PDB-PT808-S20    1
1    1200W high-efficiency power supply
1U SC808 Power Distributor

Optional Parts List

     Part Number    Qty    Description
Air Shroud    MCP-310-80901-0N    -    Air shroud for Intel motherboards
Fan(s)    FAN-0085L4 OR 
FAN-0101L4    -    1U, 40x56mm 4-pin PWM fan
 
Heatsink / Retention    -    -    Please refer to our Thermal Components Matrix
Mounting Rails    MCP-290-00056-0N
MCP-290-00052-0N-BULK
MCP-290-00054-0N    -
-
-    19" to 26.4" outer rail, /quick, for 1U 17.2" W chassis
25.6" to 33.05" outer rail, /quick, for 1U 17.2" W chassis (10 sets/pack)
25.6" to 33" outer rail, quick release for 1U 17.2" W chassis
Adaptor HDD carrier    MCP-220-00043-0N    -    Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray