Key Features

• High Performance SAS2/6GbS Expander
• Dual Expander Chip
• High Efficiency PS and Storage Capacity

1. High density 4U Storage Chassis
2. 920W Redundant Power Supplies
    Platinum Level (94%)
3. 24x 3.5" Hot-swap SAS Drive Bays
    w/ SES2 (dual-channel) and optional
    2x 2.5" Hot-swap SAS Drive Bays on
    rear side of Chassis
4. 100% Cooling Redundancy
5. Power Switch, Reset Switch &
    6 LED Indicators
6. Can be configured as either HEAD
    Or JBOD unit

Standard Parts List

     Part Number    Qty    Description
Chassis    CSE-846BE26-R920B    1    4U Chassis (Black)
Air Shroud    MCP-310-49003-0N    1    SC846 Intel DP X9, X8 PC air shroud 1368x13/12x13MB
Backplane    BPN-SAS2-846EL2    1    24-port 4U SAS2 6Gbps dual-expander backplane, support up to 24x 3.5-inch SAS2/SATA3 HDD
Cable 1    CBL-0071L    1    ROUND 16 pin TO 16 PIN RIBBON FP CABLE 75cm. 28AWG
Cable 2    CBL-0160L    2    NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
Cable 3    CBL-0160L    2    NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
Cable 4    CBL-0217L    1    16 pin control panel converter cable for SC826,846, 23.5cm, PBF
FAN 1    FAN-0125L4    2    80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
FAN 2    FAN-0127L4    3    80x80x38 mm 7K RPM SC846 Middle Fan w/ Housing
FAN 3    MCP-340-00036-0N    1    80x80x32 mm, 6.7K RPM, 4-pin PWM Bare Fan
FAN 4    MCP-340-00038-0N    1    80x80x38 mm, 7K RPM, 4-pin PWM Bare Fan
Front Panel    MCP-280-82601-0N    1    Front control board adapter (TB826) for SC216,826,936,846
Fan Holder    MCP-320-00032-0N    1    Green 80X38 Middle Fan Housing for SC743, SC846
Fan Holder    MCP-320-00033-0N    1    SC846 Cooling Fan Connector Latch
Fan Holder    MCP-320-00034-0N    1    SC836 Rear Exhaust Fan Housing
Fan Holder    MCP-320-00035-0N    1    SC836 Rear Exhaust Fan Connector Latch
Drive Tray(s)    MCP-220-00024-1B    1    MCP-220-00024-0B without dummy HDD
Drive Tray(s)    MCP-220-00075-0B    24    Black gen 5.5 hot-swap 3.5"; HDD tray
Drive Tray(s)    MCP-220-00081-0N    1    3.5" dummy HDD (hollow-panned) for MCP-220-00075-0B,RoHS/REACH,PBF
Power Distributor    PDB-PT846-2824    1    PDB with 23pairs input connector support SC846B
Power Distributor    PDB-PT846-8824    1    SC846 24PIN REDUNDANT POWER DISTRIBUTOR
Power Supply    MCP-290-84604-0N    1    SC846 PDB Cover
Power Supply    PWS-920P-SQ    2    920W 1U Redundant PWS W/ Quiet Mode
Mounting Rails    MCP-290-00057-0N    1 set    Rail set, quick/quick, default for 4U 17.2
Mounting Rails    MCP-290-00115-0N    1    Inner rail, quick-release type
Mounting Rails    MCP-290-00117-0N    1    Outer rail, quick-release type
Mounting Rails    MCP-410-00007-0N    1    Rail screw bag
Rear Window    MCP-240-84602-0N    1    846B rear window which support 2 X 2.5"; HDD module and DVD

Optional Parts List

     Part Number    Qty    Description
Cable(s)    CBL-0167L
CBL-0168L
CBL-0084L    -
-
-    SAS 846EL1 BP 1-Port Internal Cascading Cable
SAS 846EL2 BP 2-Port Internal Cascading Cable
Front control cable split converter 6"
Cable(s)    CBL-0108L-02
CBL-0281L    -
-    SFF 8087 to SFF 8087 Internal Backplane Cable, 39cm
SFF 8087 to SFF 8087 Internal Backplane Cable, 75cm
Cable(s)    CBL-0143L
CBL-0082L
CBL-0231L    -
-
-    1x 4pin to 1x SATA S-RA SATA power extension
1x 4pin to 2x SATA S-RA SATA power extension
70cm round S-RA SATA cable
Drive Trays    MCP-220-84601-0N
MCP-220-84603-0N
MCP-220-00043-0N
MCP-120-00035-0N    -
-
-
-    Single 3.5" Fixed HDD Tray (RA cables required)
Dual 2.5" Fixed HDD Tray (including MCP-220-84601-0N)
3.5" convert to 2.5" hot-swap HDD Tray
Retention bracket kit for CF card reader
Peripheral Drives    DVM-TEAC-824B
DVM-PNSC-824B
DVM-TEAC-DVD-SBT3
DVM-PNSC-DVD-SBT3
MCP-220-84607-0N
MCP-220-84606-0N    -
-
-
-
-
-    Black slim IDE DVD (8x DVD, 24x CDR), TEAC
Black slim IDE DVD (8x DVD, 24x CDR), Panasonic
Black slim SATA DVD (8x DVD, 24x CDR), TEAC
Black slim SATA DVD (8x DVD, 24x CDR), Panasonic
Rear side slim DVD kit for 846B chassis
Rear side dual 2.5" HDD kit for 846B chassis
Mounting Rail    MCP-290-00058-0N    -    19" to 26.6" rail set, Quick Release, Tool-less
(for rev. K4 or later)
Heatsink / Retention    -    -    Please refer to our Thermal Components Matrix
Front Bezel
( Compatibility Table )    MCP-210-84601-0B    -    
Front Bezel Cover, Black with Key Lock
JBOD Kit - Used for cascading purposes    CSE-PTJBOD-CB2
CBL-0166L
CBL-0102L
CBL-0352L
MCP-260-00011-0N    -
-
-
-    Power Control Card for JBOD
SAS BP External Cascading Cable
I2C CABLE FOR SATA LED, 51CM, LF
85CM 2-PORT EXT IPASS TO INT IPASS
I/O shield without any opening
RAID cards    AOC-USAS2-H4iR
AOC-USAS2LP-H8iR
AOC-USAS2-S4i
AOC-USAS2-S4iR    -
-
-
-    4 int/4 ext ports, supports 240 HDDs
8 int ports, supports 240 HDDs
4 int/4 ext ports, supports 122 HDDs
4 int/4 ext ports, supports 122 HDDs
HBA cards    AOC-USAS2-L8i
AOC-USAS2-L4i
AOC-USAS2-L8i    -
-
-    8 int ports, supports 122 HDDs
4 int/4 ext ports, supports 63 HDDs
8 int ports, supports 122 HDDs
LCD/OLED Solutions    -    -    Please reference the LCD/OLED Display Solutions for details
Adaptor HDD carrier    MCP-220-00043-0N    -    Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray